1.The bluebooth version: V3.0 + EDR.
2.The operating frequency range: ISM band(2.4-2.48GHZ)
3.Wireless range up to meters
4.Support hands-free,support music,support audio function
5.Equipped with high-definition 1W speaker,and high sensitivity microphon
6.Battery type: li-ion,3.7v,500mah
call time: 6~8 hours
standby time: up to 50-200 hours
charging time: 1-2 hours
7.Size:130mm (long)49mm (width)15mm (h)
Remove magnetic , change to clip
8. Support caller number voice broadcast
Only the device connection succeeded, playing music the Volume+ and Volume- button will working
Only on the calling mode, the Audio convert button will working
1 x Bluetooth Car Kit
1 x Car Charger
1 x Micro USB charging cable
1 x Visor Clip
1 x User Manual
1. Startup: shutdown state, long press “play” button for 2 seconds. Bluetooth hands-free boot. Blue light flashes quickly per second (flash 2 times) Bluetooth hands-free will automatically connect to the mobile phone recently connected.
2. Shutdown Bluetooth hands-free standby state according to the “PLAY” button for 2 seconds. the blue lamp will enter a hands-free shutdown mode.
3. Pairs: before the first use of Bluetooth hands-free, must be paird with Bluetooth
enabled mobile phones. The following is the match procedure
(1) The headset and phone in the distance of 1 meters pasition
(2) Determine the hands-free in shutdown state
(3) Long by hands-free “play” button for one second, boot earphone. blue light flashes
quickly. this has been prepared good pairing(if you have connected to other phones,
priority will be automatically connected to the mobile phone recently connected)
(4) Activate the function of the Bluetooth mobile phone. so that the phone starts to look for the Bluetooth device (refer to the use of the mobile phone)
(5) From the phone to the device to select the BT BIAI-TA
(6) Mobile phone input identification number “0000” and press the confirm button. your Bluetooth hands-free mobile phone matching, when successful matching: fast blue ray
every 2 seconds flash 1 times.
Note: if hands-free headset into the matching stale after 3 minutes without pairing is successful, hands-free will automatically shut down. please again according to the above method of
4. Disconnect the phone and the headset
When you want to make another Bluetooth mobile phone hands-free connection, please connect through the following steps off the phone and paired hands-free
(1) From the mobile phone Bluetooth menu. “broken open connection” neadset and phone disconnected, the headset automatically enters pairing mode, the blue LED lamp every 1 second flashed 2 times.
second flashes 2 times. This can be with the other phone painng.
Note: after losing the connection, the headset will automatically shut down within 3 minute without any connection.
5. The use of Bluetooth hands-free
(1) Answer the phone
When the telephone is ringing. Bluetooth hands-free call sends an electrical short press “PLAY” button to answer
(2) Hang up the phone when the Bluetooth hands-free calls in the stale, short press “PLAY” button to hang up the phone
(3) Reject an incoming call
When the incoming call, press”PLAY” button for 2 seconds to reject a call
Bluetooth hands-free in standby state double press the “PLAY” button.
6. Transfer calls
A: Hands-free go phone: hands free in conversation state, short press “Red dot” button, calls voice from the hands-free transferred to the phone
B: Mobile phone hands-free; again transferred to short press “Red dot” button. the voice will from the the phone transferred to hands-free
7. Volume adjustment;
Bluetooth hands-free under call state. long press”+” and”-” the volume, press the volume reduction.
8. Playing mobile phone music (when the phone is connected with the hands-free)
(1) Short press “-” previous song. long press”-” volume down
(2) Short press “+” next song. long press”+”to increase the volume